37777 Harlow Dr., Willoughby, OH 44094 (440) 951-8974 Fax: (440) 951-1412
PC-DNC Editor for Windows (basic version)
an NC Editor
with a difference....
|We're very proud of our PC-DNC Editor for Windows. It contains perhaps the most sophisticated file compare algorithm of any available G-code editor. We don't just detect altered lines of code... We detect inserted, deleted, and altered lines, and also detect the inserted, deleted, and altered characters within each altered line. Our new File/Convert function lets you perform programmable "mass edits", so you can quickly convert files from one type of CNC to another.|
PC-DNC Editor for Windows (Multi-port DNC version)
While the basic version of PC-DNC Editor can upload, download and run DNC via any Windows serial port, we also have a more full-featured version with "Multi-Port DNC" capability. The Multi-Port DNC option lets you run in "drip-feed" mode through several serial ports simultaneously. This option also lets you easily cycle start from the middle of a file, and performs "on the fly" sub-file merging using "CALL" statements within your program. A parallel BTR output function lets you connect older Fanuc and Yasnac CNCs to your PCs parallel printer port. This is the hot setup for cutting 3-D surfaces on almost any older CNC mill or machining center.
NOTE: When using the Multi-port PC-DNC Editor with a parallel BTR cable, you must locate your computer within 16 feet (5 meters) of the CNC control. BTR cables are currently available for Fanuc 2000C/3000C, Fanuc 5T/5M, Fanuc 6T/6M, Yasnac 2000B and 2000G controls. Parallel BTR drivers only support versions of Windows up to and including Windows XP. Windows Vista, Windows 7, and Windows 8 are NOT supported at this time.
|The Multi-port DNC option lets you open multiple DNC windows, each transmitting to its own serial port. These windows each operate within its own thread, permitting you to edit files or run other applications without interfering with the DNC operation. Each window can be individually controlled, permitting mid-file startup, resetting, scanning, etc. The multi-port version of PC-DNC Editor sells for $1295.00. Standard versions of the editor can be upgraded to multi-port operation at any time.||